Standard 2" Buttons: What's up with the Plastic Back? March 01 2017

If you've ever looked into getting a Standard 2" Round Button Maker, you may have noticed that the 2" Pinned Back is a little different than every other size of button. It's made of black plastic instead of metal.

There is reasoning behind the 2" Plastic Back, and you're gonna find out all about it!

First, start off with this video on "How to Make 2 Inch Round Buttons with Plastic Pinned Backs" courtesy of The Button Guy!

 HOW TO MAKE 2" BUTTONS WITH PLASTIC PINNED BACKS

 

Now that you know how a Standard 2" Button is Made, we'll fill you in on the mysterious black plastic backing!

THIRD PRESS OPERATION

When a button is made with a plastic backing, the edge of the button gets crimped at a 45 degree angle. For a pinback button, this 45 degree crimp will hold the button together no problem. The problem with this crimp becomes obvious if you try and mount that button on a plaque, scrap book, or card. It just doesn't lay flat!

The Standard 1", 2", and 6" Round Buttons can be subject to a "Third Press Operation" patented by Tecre. This simply means that the the button gets pressed one extra time in the the pick up die, which flattens the edge completely. The button, now with a flattened back, can be adhered to whatever you like using double sided sticky foam disks or other adhesives.

So now you know what's up the the plastic back! Yay 2 inch buttons :)